Please follow these steps before operating the machine:
 

• Remove the foam packaging and bracing.

• Remove the plastic film from the splash guards and the enclosure door.

• Assemble the 6 Enclosure pieces (or 5 machine stand pieces) using the 12 (or 6) screws provided.

• Insert the splash guards into the white fixture.

• Make sure the thin white tray is placed on top of the fixture.

• Apply the black Z-spring circle to the yellow bit, then apply the white foam to the black Z-spring.

• Apply pieces of the black silicone adhesive strips and squares to the back of the device to be polished so that the device lays flat.

 

To prevent damage to the phone or injury to yourself:
 

1. Do not leave the machine unattended during use.

2. Be aware of potential pinch points at the front of the machine between the tray and the body of the machine.

3. Wear protective eyewear when operating the machine.